Boost the protection of your home with an smart alarm system from Homeland Security Solutions

A good burglar alarm system is an important element of home security solutions. With the right alarm, you can provide increased protection and peace of mind when it comes to your loved ones as well as your home and belongings.
At Homeland Security Solutions, we can help you with this by offering you our smart, reliable and accurate Ajax alarm system; you will have an advanced layer of protection throughout your property. Detectors identify threats immediately, whether it be a door opening, a window breaking or an intruder entering your premises, your alarm system will react and alert you.
Another advantage of this wireless alarm system is that there are no wires to run! This makes fitting the alarm systems so much neater inside the property!

Boost the protection of your home with an alarm system from Homeland Security Solutions

With our sensible, reliable, and smart alarm, you’ll have a complicated layer of protection throughout your property. Detectors establish threats straight away, whether or not it’s a door gap, a window breaking, or a intruder getting into your premises, your alarm will react, and alert you.

Manage your security system from anywhere with an easy-to-use app

This app, comes with Ajax smart alarm solution, turns your security system into one easy-to-manage device. You’ll arm and disarm your alarm with simply a couple of clicks. Activate appliances before you get home and switch off those you forgot after you were gone. Get instant messages and alerts when you activate the device.

Flood Detection

When the water reaches the detector, it raises the alarm straight away. All four sides of the Leaks protects have contact pairs. once contact is made by water, the detector reports a leak. once the contacts dry out and open, it notifies you that the leakage has stopped. Up to five years of operation from battery Works 24/7

Iternal Sounder

This Ajax Home Siren may be a wireless indoor siren that loudly notifies of an alarm throughout detector activation. It’s put in to alert danger or deter intruders. This device notifies of detector activation with an audible alarm. Sound level and alarm length are set within the mobile application.

Panic Button

The panic button features a range of around 1300 meters, it can be put in anyplace within the property. If the button is pressed, an alert is sent to everyone who has the Ajax App installed on their device there is no limit to the amount of panic buttons which will be more to the system.

PIR MOTION SENSOR

The wireless PIR detector can be positioned anyplace within the property. The range of the sensors is roughly 2km line of sight. If needed, signal repeaters will be put in to increase the signal to the control panel. This can be ideal for extra sensors in outer sheds or home offices.

Our engineer can fix the sensors to the most elements of the property, usually within the corner of the area for it to be simplest. Once putting in the detector, there’s a tamper on the rear of the bracket. If somebody smashes the detector off the wall, it’ll still trigger the alert.

The detector features a wide-angle 12m detection range. If triggered the detector can send a notification to the mobile application within 0.5 a second. it’ll report the temperature of the room. The PIR detector accurately detects someone in extreme heat conditions. it’s also effective at ignoring cats and dogs to prevent false alarms.

PIR sensor with inbuilt camera

The visual detection PIR has an inbuilt camera. If it detects someone within the property, it takes five photos to make a brief video.
This can be compressed and sent to the users phone among ten seconds. The visual detection is incredibly helpful for the client to see who has triggered the alarm.
The camera has a built infra red sensor, therefore it will see within the dark. The camera only activates if the sensor is triggered while the alarm is armed.
To protect your privacy, you can not remotely activate the camera. All the images the sensor takes are encrypted on the phone

PIR

The wireless PIR detector can be positioned anyplace within the property. The range of the sensors is roughly 2km line of sight. If needed, signal repeaters will be put in to increase the signal to the control panel. This can be ideal for extra sensors in outer sheds or home offices.
Our engineer can fix the sensors to the most elements of the property, usually within the corner of the area for it to be simplest. Once putting in the detector, there’s a tamper on the rear of the bracket. If somebody smashes the detector off the wall, it’ll still trigger the alert.
The detector features a wide-angle 12m detection range. If triggered the detector can send a notification to the mobile application within 0.5 a second. it’ll report the temperature of the room. The PIR detector accurately detects someone in extreme heat conditions. it’s also effective at ignoring cats and dogs to prevent false alarms.

Smoke/Heat/Carbon Monoxide

This wireless detector comes with temperature and carbon monoxide sensors that monitors security in the room twenty four hours on a daily basis and notifies of dangerous CO levels, smoke and sharp jumps in temperature.

WIRELESS KEYPAD

There are multiple ways in which the warning device can be armed and disarmed. Either with the fob, mobile or keyboard. The wireless key pad can be put in anyplace within the property. The key code is set by the client and can be changed with the app anytime. If the incorrect code, AN alarm will be sent to the App The keyboard is then blocked mechanically and would have to be changed by the administrator on the app. The wireless keyboard takes 3 x AAA batteries and is intended for indoor use only.